Lantronix SecureLinx SLC8 User Manual page 199

Note: The Config Params to Preserve get contained as a comma-separated list of
current configuration parameters that are kept after the config restore or
factorydefaults.
Description
Restores the factory default settings.
admin config restore
Syntax
admin config restore <Config Name> location <local | ftp | sftp | nfs |
cifs | pccard | usb> [nfsdir <NFS Mounted Directory>] [usbport
<U1>][pccardslot <upper|lower>] [savesshkeys <enable|disable>]
[savesslcert <enable|disable>] [savescripts <enable|disable>]
[preserveconfig <Config Params to Preserve>]
<Config Params to Preserve>
nt - Networking
sv - Services
dt - Date/Time
lu - Local Users
Note: The Config Params to Preserve get contained as a comma-separated list of
current configuration parameters that are kept after the config restore or
factorydefaults.
Description
Restores a saved configuration to the SLC.
admin config save
Syntax
admin config save <Config Name> location <local | ftp | sftp | nfs | cifs
| pccard | usb> [nfsdir <NFS Mounted Directory>] [usbport <U1>]
[pccardslot <upper|lower>] [savesshkeys <enable|disable>] [savesslcert
<enable|disable>] [savescripts <enable|disable>]
Description
Saves the current SLC configuration to a selected location.
admin config show
Syntax
admin config show <default|ftp|sftp|nfs|cifs|pccard |usb> [nfsdir <NFS
Mounted Dir>] [usbport <U1>][pccardslot <upper|lower>]
Description
Lists the configurations saved to a location.
SecureLinx SLC User Guide
ra - Remote Authentication
dp - Device Ports
pc - PC Card
ub - USB
15: Command Reference
199