Usb Commands; Figure 10-4 Firmware And Configurations - Manage Files (Bottom Of Page) - Lantronix SecureLinx SLC8 User Manual

Figure 10-4 Firmware and Configurations - Manage Files (Bottom of Page)
2. To delete a file, click the check box next to the filename and click Delete File. A confirmation
message displays.
3. To download a file, click the Download button. Select the file from the list.
4. To rename a file, click the check box next to the filename and enter a new name in the New
File Name: box. Click Rename File.

USB Commands

The following CLI commands correspond to the USB port. For more information, see
Command Reference.
set usb access (on page 250)

set usb modem (on page 250)

set usb storage mount (on page 252)

set usb storage unmount (on page 252)

set usb storage dir (on page 251)

set usb storage rename (on page 251)

set usb storage copy (on page 251)

set usb storage delete (on page 252)

SecureLinx SLC User Guide
10: USB Port
15:
125