Administrator Commands - Lantronix SecureLinx SLC8 User Manual

Administrator Commands

In addition to the commands that the user can issue, the administrator can issue the following
commands:
imagecopy
passwd
ping
printeny
setenv
showconf
SecureLinx SLC User Guide
Copies an image of the drive from the lower
PCMCIA device to the internal CF card.
Provides a new password for user admin. The
default password for user admin is admin. User
cust does not have a password.
Sends a ping request to the network host.
Prints bootloader variables.
Sets environment variables.
Displays hardware configuration parameters.
A: Bootloader
255