Device Commands - Lantronix SecureLinx SLC8 User Manual

set datetime
Syntax
set datetime <one date/time parameter>
Parameters
date <MMDDYYhhmm[ss]>
timezone <Time Zone>
Note: If you do not have a valid <Time Zone>, enter "timezone <invalid time zone>" and
the system guides you through the process of selecting a time zone.
Description
Sets the local date, time, and local time zone (one parameter at a time).
show datetime
Syntax
show datetime
Description
Displays the local date, time, and time zone.
set ntp
Syntax
set ntp <one or more parameters>
Parameters
localserver1 <IP Address or Name>
localserver2 <IP Address or Name>
localserver3 <IP Address or Name>
poll <local|public>
publicserver <IP Address or Name>
state <enable|disable>
sync <broadcast|poll>
Description
Synchronizes the SLC with a remote time server using NTP.
show ntp
Syntax
show ntp
Description
Displays NTP settings.

Device Commands

SecureLinx SLC User Guide
15: Command Reference
213