Script Commands - Lantronix SecureLinx SLC8 User Manual

show routing
Syntax
show routing [sort <destination|iface>] [display <IP Address>]
[resolveip <enable|disable>] [email <Email Address>]
Description
Sets the routing table to display IP addresses (disable) or the corresponding host names (enable).
You can email the displayed information.

Script Commands

set script delete
Syntax
set script delete <interface|batch> name <Script Name>
Description
Delete a script.
set script import
Syntax
set script import <interface|batch> via <ftp|scp|copypaste> [file
<Script File>] [name <Script Name>] [host <IP Address or Name>] [login
<User Login>] [path <Path to Script File>]
Note: Interface scripts have default/do user rights. Batch scripts have admin/ad user
rights. The script name is the same as the file name (if it is a valid script name), otherwise
a script name must be specified for import.
Description
Import a script.
set script rename
Syntax
set script rename <interface|batch> name <Script Name> newname <New
Script Name>
Description
Rename a script.
set script runcli
Syntax
set script runcli <Script Name>
Description
Run a CLI batch script.
SecureLinx SLC User Guide
15: Command Reference
242