Local/Remote Users Commands - Lantronix SecureLinx SLC8 User Manual

3. Click the Apply button.
To delete a local user:
1. On the Local/Remote Users page, select the user and click the Add/Edit User button. The
Local/Remote User Settings page displays.
2. Click the Delete User button.
3. Click the Apply button.
To change the sysadmin password:
1. On the Local/Remote Users page, select sysadmin and click the Add/Edit User button. The
Local/Remote User Settings page displays.
2. Enter the new password in the Password and Retype Password fields.
Note: You can change Escape Sequence and Break Sequence, if desired. You cannot
delete the UID or change the UID, port permissions, or custom menu.
3. Click the Apply button.

Local/Remote Users Commands

The following CLI commands correspond to the Local/Remote Users page. For more information,
see 15: Command
set localusers (on page 227)

set localusers allowreuse (on page 227)

set localusers complexpasswords (on page 227)

set localusers consoleonlyadmin (on page 228)

set localusers state (on page 229)

set localusers password (on page 229)

set localusers delete (on page 228)

set localusers lifetime (on page 228)

set localusers lock (on page 228)

set localusers maxloginattempts (on page 228)

set localusers multipleadminlogins (on page 228)

set localusers periodlockout (on page 229)

set localusers periodwarning (on page 229)

set localusers reusehistory (on page 229)

set remoteusers (on page 240)

set remoteusers listonlyauth (on page 241)

set remoteusers delete (on page 241)

show localusers (on page 229)

show remoteusers (on page 241)

show user (on page 206)

SecureLinx SLC User Guide
Reference.
12: User Authentication
143