Optional 250/500 Paper Tray Assembly - Lexmark 4059-XXX Service Manual

4059-XXX

Optional 250/500 Paper Tray Assembly

Note: Remove the printer and other paper feed options to access
the failing optional paper tray assembly.
Paper Tray Compensator Assembly
1. Remove the printer and other paper feed options.
2. Disconnect the compensator assembly bias spring from the tray
frame.
3. Disconnect the compensator assembly motor cable.
4. Remove the three compensator assembly mounting screws and
remove the compensator assembly.
Paper Tray Frame Assembly
1. Remove the compensator assembly.
2. Release the paper pass through sensor from its retaining tabs.
3. Release the frame assembly from the front and rear retaining
tabs and remove the paper tray frame assembly.
Paper Tray Board
1. Remove the paper tray frame assembly.
2. Disconnect all cables from the paper tray board.
3. Remove the three paper tray board mounting screws and
remove the board.
Note: Reinstall with the paper out sensor flag positioned in the
sensor slot on the paper tray board.
Paper Tray Paper Out Sensor Flag
1. Remove the paper tray frame assembly.
2. Remove the paper tray board.
3. Remove the paper out sensor flag.
Paper Size Spring Comb
1. Remove the paper tray board.
2. Remove the paper size spring comb mounting screw and
remove the spring comb.
Repair Information
4-50