Replicating The Setup; Copying To Single Computer; Copying To Multiple Computers - HP Rp5700 - Point of Sale System Reference Manual

Replicating the Setup

The following procedures give an administrator the ability to easily copy one setup configuration to other
computers of the same model. This allows for faster, more consistent configuration of multiple
computers.
NOTE: Both procedures require a diskette drive or a supported USB flash media device, such as an
HP Drive Key.

Copying to Single Computer

CAUTION:
target computers are not the same model. For example, do not copy the setup configuration from an
rp50xx PC to an rp57xx PC.
1. Select a setup configuration to copy. Turn off the computer. If you are in Windows, click Start >
Shut Down > Shut Down.
2. If you are using a USB flash media device, insert it now.
3. Turn on the computer.
4. As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press
5. If you are using a diskette, insert it now.
6. Click File > Replicated Setup > Save to Removable Media. Follow the instructions on the screen
to create the configuration diskette or USB flash media device.
7. Turn off the computer to be configured and insert the configuration diskette or USB flash media
device.
8. Turn on the computer to be configured.
9. As soon as the computer is turned on, press
Computer Setup. Press
10. Click File > Replicated Setup > Restore from Removable Media, and follow the instructions on
the screen.
11. Restart the computer when the configuration is complete.

Copying to Multiple Computers

CAUTION:
target computers are not the same model. For example, do not copy the setup configuration from a
dc7xxx PC to a dx7xxx PC.
This method takes a little longer to prepare the configuration diskette or USB flash media device, but
copying the configuration to target computers is significantly faster.
NOTE: A bootable diskette is required for this procedure or to create a bootable USB flash media
device. If Windows XP is not available to use to create a bootable diskette, use the method for copying
to a single computer instead (see
34 Chapter 4 Desktop Management
A setup configuration is model-specific. File system corruption may result if source and
Enter
If you do not press F10
F10 when the monitor light turns green to access the utility.
Enter
A setup configuration is model-specific. File system corruption may result if source and
Copying to Single Computeron page
F10 when the monitor light turns green to enter
to bypass the title screen, if necessary.
at the appropriate time, you must restart the computer and again
F10 when the monitor light turns green to enter
to bypass the title screen, if necessary.
34).
ENWW