Using Computer Setup (F10) Utilities - HP Rp5700 - Point of Sale System Reference Manual

●
Replicate the system setup by saving system configuration information to a USB flash media device
or a diskette-like device (a storage device set to emulate a diskette drive) and restoring it on one
or more computers.
●
Execute self-tests on a specified ATA hard drive (when supported by drive).
●
Enable or disable DriveLock security (when supported by drive).

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access
the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press
3. Select your language from the list and press Enter.
4. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security,
Power and Advanced.
5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)
keys to select the option you want, then press Enter. To return to the Computer Setup Utilities
menu, press Esc.
6. To apply and save changes, select File > Save Changes and Exit.
●
●
CAUTION:
changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting
the F10 Setup screen.
Table 2-1
Heading
File
Storage
Security
Power
Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
6 Chapter 2 Computer Setup (F10) Utility
Enter
If you do not press
F10 when the monitor light turns green to access the utility.
If you have made changes that you do not want applied, select Ignore Changes and Exit.
To reset to factory settings or previously saved default settings (some models), select Apply
Defaults and Exit. This option will restore the original factory system defaults.
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)
Computer Setup (F10) Utility
F10 when the monitor light turns green to enter
to bypass the title screen, if necessary.
F10 at the appropriate time, you must restart the computer and again
Table
Table 2-2 Computer Setup—File on page 7
Table 2-3 Computer Setup—Storage on page 8
Table 2-4 Computer Setup—Security on page 11
Table 2-5 Computer Setup—Power on page 13
Table 2-6 Computer Setup—Advanced (for advanced users)
on page 14
ENWW