Computer Setup-Security - HP Rp5700 - Point of Sale System Reference Manual

Computer Setup—Security
Table 2-4 Computer Setup—Security
Option
Smart Card Options
(some models)
Setup Password
Power-On Password
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Embedded Security
(This menu item only
appears after the
Embedded Security
Device is made available
under Device Security.)
Device Security
ENWW
Description
Allows you to enable/disable the Smart Card to be used in place of the Power-On Password.
Allows you to set and enable setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
See the Troubleshooting Guide on the Documentation and Diagnostics CD for more information.
Allows you to set and enable power-on password. The power-on password prompt appears after a
power cycle. If the user does not enter the correct power-on password, the unit will not boot.
NOTE: This password does not appear on warm boots , such as
from Windows, unless enabled in Password Options, below.
See the Troubleshooting Guide on the Documentation and Diagnostics CD for more information.
Allows you to:
● Lock legacy resources (appears if a setup password is set)
●
Enable/disable network server mode (appears if a power-on password is set)
●
Specify whether the password is required for warm boot
on password is set)
● Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but
not changing, the F10 Setup Options without entering setup password)
See the Desktop Management Guide on the Documentation and Diagnostics CD for more
information.
Allows you to:
●
Enable/disable the Embedded Security device
●
Reset the device to Factory Settings
● Enable/disable power-on authentication support (some models)
●
Reset authentication credential (some models)
This feature is supported on some models only. See the Desktop Management Guide on the
Documentation and Diagnostics CD for more information.
Allows you to set Device Available/Device Hidden for
●
Serial ports
●
Parallel port
● All USB ports
● Front USB ports
●
System audio
● Network controllers (some models)
●
Embedded security device (some models)
Ctrl + Alt + Delete or Restart
(Ctrl + Alt + Delete) (appears if a power-
Computer Setup (F10) Utilities 11