Type 3 Battery Holder - HP Rp5700 - Point of Sale System Reference Manual
Business system service reference guide
Hide thumbs
Also See for Rp5700 - Point of Sale System:
- Hardware reference manual (68 pages) ,
- Specification (40 pages) ,
- Setup utility manual (17 pages)
Table of Contents
Advertisement
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to the Computer Setup (F10) Utility Guide.
Type 3 Battery Holder
1.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2.
Insert the new battery and position the clip back in place.
Figure 7-62
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to the Computer Setup (F10) Utility Guide.
ENWW
Type III Battery Holder
Battery 115
Advertisement
Table of Contents
