HP Rp5700 - Point of Sale System Reference Manual page 90

b.
11. Store the removed card in anti-static packaging.
12. If you are not installing a new expansion card, install an expansion slot cover to close the open
slot.
CAUTION:
slot cover for proper cooling of internal components during operation.
80 Chapter 7 Removal and Replacement Procedures — Small Form Factor (SFF) Chassis
If you are replacing an existing card, hold the PCI card at each end, and carefully rock it back
and forth until the connectors pull free from the socket. Pull the expansion card toward the left
side of the chassis straight out of the riser. Be sure not to scrape the card against the other
components.
NOTE: Before removing an installed expansion card, disconnect any cables that may be
attached to the expansion card
Figure 7-22 Removing a Standard PCI Expansion Card
After removing an expansion card, you must replace it with a new card or expansion
ENWW