IBM NetVista Hardware Maintenance Manual page 26

To order replacement batteries, call 1-800-772-2227 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada, call
your IBM reseller or IBM marketing representative.
Note: After you replace the battery, you must reconfigure your system and reset
Do the following to replace the battery:
1. Read "Before you begin" on page 25, and follow any special handling and
2. Remove any media (diskettes, CDs, or tape) from the drives and shut down
3. Turn off the computer and attached devices and disconnect all external cables
4. If necessary, unlock the computer cover; then, remove the computer cover. See
5. Do the following to remove the battery:
6. Do the following to insert the new battery:
7. Reinstall the cover, see "Replacing the cover" on page 38.
8. Reconnect the external cables and power cords; then turn on the attached
9. Start the Configuration/Setup Utility program and set configuration
18
IBM NetVista Type 6838, 6848: Hardware Maintenance Manual
the system date and time.
installation instructions supplied with the replacement battery.
your operating system.
and power cords.
"Removing the cover" on page 26.
a. Press the battery release tab to release the battery from the socket.
b. Lift the battery out of the socket.
a. Tilt the battery so that you can insert it into the socket.
b. Press down on the battery after you insert it into the socket.
devices and the computer.
parameters.
v Set the system date and time.
v Set the power-on password.
v Reconfigure your system.