Installing Internal Drives In Bays 1, 2 And 3 - IBM NetVista Hardware Maintenance Manual

1
2
3
4
5
6
7

Installing internal drives in bays 1, 2 and 3

1. Remove the cover (see "Removing the cover" on page 26).
2. Insert a flat–bladed screwdriver into one of the slots on the static shield in the
28
IBM NetVista Type 6838, 6848: Hardware Maintenance Manual
Bay 1 - Max Height:
Bay 2 - Max Height:
Bay 3 - Max Height:
Bay 4 - Max Height:
Bay 5 - Max Height:
Bay 6 - Max Height:
Bay 7 - Max Height:
drive bay into which you are installing the drive and gently pry the static
shield loose from the drive bay.
41.3 mm (1.6 in.) CD-ROM drive (standard in some models)
5.25-inch hard disk drive
41.3 mm (1.6 in.) 5.25-inch hard disk drive 3.5-inch hard
disk drive (requires a mounting bracket) CD-ROM drive
DVD-ROM drive
25.4 mm (1.0 in.) 3.5-inch diskette drive
25.4 mm (1.0 in.) Hard disk drive 3.5-inch removable drive
25.4 mm (1.0 in.) Hard disk drive
25.4 mm (1.0 in.) Hard disk drive
25.4 mm (1.0 in.) Hard disk drive