Text Messages; Starting The Diagnostic Programs - IBM NetVista Hardware Maintenance Manual

iii is the three-digit device ID. (These codes are for trained service personnel
and are described in the Hardware Maintenance Manual.)
date is the date that the diagnostic test was run and the error recorded.
cc are the check digits that are used to verify the validity of the information.
text message
is the diagnostic message that indicates the reason for the problem.

Text messages

The diagnostic text message format is as follows:
Function Name: Result (test specific string)
where:
Function Name
is the name of the function being tested when the error occurred. This
corresponds to the function code (fff) given in the previous list.
Result can be one of the following:
Passed
Failed This result occurs when the diagnostic test discovers an error.
User Aborted
Not Applicable
Aborted
Warning
Test Specific String
is additional information that is used to analyze the problem.

Starting the diagnostic programs

The IBM Enhanced Diagnostics programs will isolate your computer hardware
from software that you have installed on your hard disk drive. The programs run
independently of the operating system, and must be run either from a CD or diskette.
This method of testing is generally used when other methods are not accessible or
have not been successful in isolating a problem suspected to be hardware related.
A Device Drivers and IBM Enhanced Diagnostics CD comes with your computer. You
can also download the latest diskette image of the diagnostics from
http://www.ibm.com/pc/support on the World Wide Web.
This result occurs when the diagnostic test completes without any
errors.
This result occurs when you stop the diagnostic test before it is
complete.
This result occurs when you specify a diagnostic test for a device
that is not present.
This result occurs when the test could not proceed because of the
system configuration.
This result occurs when a possible problem is reported during the
diagnostic test, such as when a device that is to be tested is not
installed.
9
Chapter 3. Diagnostics