IBM NetVista Hardware Maintenance Manual page 59

Hardware maintenence manual for netvista 6838 and 6848 systems
Hide thumbs Also See for NetVista:
Table of Contents

Advertisement

Diagnostic Error Code
000-199-XXX BIOS test failed, cause
unknown
000-250-XXX BIOS APM failure
000-270-XXX BIOS ACPI failure
001-000-XXX System Test Passed
001-00X-XXX System Error
001-01X-XXX System Error
001-024-XXX System Addressing test failure
001-025-XXX System Checksum Value error
001-026-XXX System FLASH data error
001-027-XXX System Configuration/Setup
error
001-032-XXX System Device Controller
failure
001-034-XXX System Device Buffer
Allocation failure
001-035-XXX System Device Reset condition
detected
001-036-XXX System Register error
001-038-XXX System Extension failure
001-039-XXX System DMI data structure
error
001-040-XXX System IRQ failure
001-041-XXX System DMA failure
001-195-XXX System Test aborted by user
001-196-XXX System test halt, error
threshold exceeded
FRU/Action
1. Go to the "Undetermined problems"
section
2. Flash the system and re-test
3. Replace component under function test
1. Flash the system
2. System board
1. Flash the system
2. System board
1. No action
1. System board
1. System board
1. System board
1. Flash the system
2. System board
1. Flash the system
2. System board
1. Run Setup
2. Flash the system
3. System board
1. System board
1. Reboot the system
2. Flash the system
3. Run memory test
4. System board
1. System board
1. System board
1. Adapter card
2. System board
1. Flash the system
2. System board
1. Power-off/on system and re-test
2. System board
1. Power-off/on system and re-test
2. System board
1. Information
2. Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
Chapter 7. Symptom-to-FRU index
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netvista 6838Netvista 6848

Table of Contents