Forwarding All Calls - Cisco WIP320 User Manual

Using Basic Phone Functions

Forwarding All Calls

Forwarding All Calls

NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Use the Call Forward All feature to forward all calls to another extension or an
external phone number that you specify. This feature temporarily overrides the
Call Forward Busy/No Answer settings that your phone administrator configured
for your phone.
Your phone administrator configures the Call Forward Busy/No Answer settings for
all extensions, shared lines, and hunt groups. The default destination is voicemail, if
enabled. The phone administrator may specify another destination, as required.
Check with your phone administrator for details.
You can use star codes for this feature. For more information, see
Codes on Cisco IP Phones, page
feature is available only by using the star codes.
Task
Forwarding all incoming
calls to another number
Disabling Call Forward
All by using the softkey
76. On Cisco SPA301 and SPA501G, this
Instructions
1. Press or
Cfwd
2. Enter the extension or phone number. For an
outbound call, include the dialing prefix required
to get an outside line, as well as any long-
distance prefix required for your phone service.
(No dialing prefix is required on a shared line.)
3. Press . (This step is not required for an
Dial
internal number.) The display screen displays
Calls Forwarded. All incoming calls will be
forwarded to the specified number.
Press or
-Cfwd Clr Fwd
Using Star
.
Forward
.
2
43