Cisco WIP320 User Manual page 48

Using Basic Phone Functions
Parking a Call
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Task
To unpark a call from a
list of parked calls
Cisco SPA525G/G2
Parking and unparking a
call by using a call Park
Slot button
If configured
Instructions
1. Press .
2. Select Status.
3. Select Call Park Status.
4. Select the call that you want to unpark.
5. Select .
Unpark
During a call, press the feature button for the Park
Slot. The call is placed on hold in the specified park
slot. To unpark the call, press the Park Slot button
again.
Other options for unparking the call:
• If another user's phone is configured with the
same button, such as Park Slot 1, you can
unpark the call from that phone.
• Press
Unpark
enter the park slot number, such as 1.
• Lift the receiver on any IP phone, and enter
* 3 9 . At the tone, press the park slot
number followed by
on any IP phone, and then
# .
2
48