Configuring Privacy Features - Cisco WIP320 User Manual

Using Advanced Phone Features

Configuring Privacy Features

Configuring Privacy Features

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Also see Using Star Codes on Cisco IP Phones, page
For Cisco SPA301 and SPA501G, you can configure these features only by
using the star codes.
Task
Blocking or allowing
caller ID by using the
Setup menu
Cisco SPA50xG models
Cisco SPA525G/G2
Instructions
Follow these steps to make anonymous calls. Be
aware that this setting will prevent your calls from
reaching recipients who block anonymous calls.
1. Press .
2. Select Preferences.
3. Scroll to Block Caller ID, and then press
4. Press to choose Yes (your caller ID will
Y/N
be blocked) or No (your caller ID will be
available).
5. Press , and then press
OK
6. Press to close the menu.
Cancel
Follow these steps to make anonymous calls. Be
aware that this setting will prevent your calls from
reaching recipients who block anonymous calls.
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Scroll to Block Caller ID.
5. Press the right-arrow navigation button to enter a
check mark (your caller ID will be blocked) or to
clear the check mark (caller ID will be available).
6. Press .
Save
3
76.
Edit
.
Save
.
64