Cisco WIP320 User Manual page 55

Using Basic Phone Functions
Using the Call History Lists
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Task
Choosing a list
Cisco SPA525G/G2
Viewing the entries
Placing a call to a
selected number
Deleting an entry from
the list
Editing an entry before
dialing
Adding a Call History
item to your contact list
(personal address book)
Instructions
Press , and then select Call History. Select one
of these lists:
1. All Calls: All calls that were placed, received, or
missed recently on this phone.
2. Missed Calls: Caller ID information for calls that
rang this phone but were unanswered.
3. Received Calls: Caller ID information for the calls
that were received recently on this phone.
4. Placed Calls: Extensions and phone numbers
that were dialed recently from this phone.
Press the up-arrow or down-arrow navigation
button to move the cursor up or down the list.
Scroll to the entry for the number that you want to
call, and then press
1. Scroll to the entry, and then press
SPA50xG models) or press
select (Cisco SPA525G/G2).
Delete
2. When the confirmation message appears, press
to delete the entry.
OK
1. Scroll to the entry, and then press
.
EditDial
2. Use the softkeys and the keypad to edit the
number. For more information, see
Editing Characters, page
3. On SPA303 and SPA50xG phones, press
to save your changes.
OK
4. To place a call to the edited number, press
Dial .
1. Scroll to the Call History item that you want to
save, and then press
models) or press
Address Book (Cisco SPA525G/G2). The
contact entry window appears.
2. If needed, edit the name, number, or ring tone. For
editing instructions, see
(Personal Address Book), page
3. Press .
Save
.
Dial
Delete
and then
Option
Edit
Entering and
23.
(Cisco SPA50xG
Save
and then select Add to
Option
Using Your Contact List
51.
2
(Cisco
or
55