Entering And Editing Characters - Cisco WIP320 User Manual

Getting Started

Entering and Editing Characters

Entering and Editing Characters
NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
If you make a mistake when entering a number, you can edit your entry on the
phone screen. On some screens, you can enter letters as well as numbers.
Not available on Cisco SPA301 or Cisco SPA501G
When entering a number for an outbound call, include the dialing prefix required to
get an outside line, as well any long-distance prefix required for your phone service.
(A dialing prefix is not required for a call placed from a shared phone line.)
Task
Deleting a character
Deleting all characters
Cisco SPA50xG models
Cisco SPA525G/G2
Moving the cursor in a
field
Cisco SPA50xG models
Cisco SPA525G/G2
Changing the mode to
numbers or letters
Cisco SPA50xG models
Instructions
If you make a mistake, press
over the previous number or character.
Press to erase your entry.
Clear
Press , and then select Clear from the
Option
menu.
Press the << softkey to move the cursor to the left,
or press the >> softkey to move the cursor to the
right.
Press the right-arrow navigation button
the cursor to the right or press the left-arrow button
to move the cursor to the left.
Some fields allow you to enter letters and numbers.
If you need to change the mode, use these
softkeys:
• Num: numeric
• Alpha: alphanumeric
Note: You may need to press the right-arrow or left-
arrow button to see these options.
1
to backspace
DelChar
to move
23