Setting Or Changing A Phone Password - Cisco WIP320 User Manual

Using Basic Phone Functions

Setting or Changing a Phone Password

Setting or Changing a Phone Password

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
You can set or change the password. When away from your phone, you can log out
to prevent other personnel from accessing the directory, call history, user
preferences, and other features on your phone.
Not available on Cisco SPA301 or SPA501G
Task
Setting a password
Cisco SPA50xG models
Setting a password
Cisco SPA525G/G2
Logging out
Cisco SPA50xG models
Instructions
1. Press .
2. Select Set Password.
3. Enter a numeric password in the first New
Password field.
4. Press the down-arrow navigation button to move
to the second New Password field.
5. Enter the same password again to confirm.
6. Press .
Save
1. Press .
2. Select Device Administration.
3. Select Set Password.
4. Old Password: Enter your old password (leave
blank if you have never set a password). Press
the down-arrow navigation button. Note: The
password field is an alpha-numeric field. Refer to
the display to see which characters are available.
Press a key multiple times until the desired
character is selected. Pause to enter the
selected character.
5. New Password: Enter your new password.
6. Press the down-arrow navigation button.
7. Re-enter New Password: Re-enter your new
password to confirm.
8. Select .
Save
1. Press .
2. Select Logout (the last option in the list). While
logged out, you can place calls, but you will be
prompted for a password if you attempt to
access the directory, call history, or user
preferences.
2
56