Using Star Codes On Cisco Ip Phones - Cisco WIP320 User Manual

Using Advanced Phone Features

Using Star Codes on Cisco IP Phones

Using Star Codes on Cisco IP Phones

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
You can use "star codes" to access phone supplementary services. Choose a star
code from a list on the phone screen, or enter the star code manually.
Choosing a star code from a list:
• Cisco SPA50xG models (except 501G): Press the right-arrow navigation
button until
*code
navigation button to select a star code. Then press
prompts may appear.
• Cisco SPA525G/G2: Press Option, and then select Input Star Code. Press
the down-arrow navigation button to select a star code. Additional prompts
may appear.
Entering a star code manually:
• During an active call: Place the call on hold. Press
code.
• For a new call: Lift the handset, select
Press and then enter the code.
*
For some codes, you may need to press Dial to continue (not required on Cisco
SPA301 or Cisco SPA501G). For some codes, additional prompts will appear (or a
tone will play on Cisco SPA301 or Cisco SPA501G). For more information, refer to
the following table.
Enter: To do this:
*36 Pick up a ringing call for a
particular extension.
appears. Press
*code
Notes
Not available on Cisco SPA301 or Cisco
SPA501G
You will be prompted to enter the extension
number of the ringing phone. Then press
. When the call information appears,
Dial
press
Dial
you do not want to pick up the call.
. Press the down-arrow
. Additional
Dial
and then enter the
*
or , or press a line button.
to confirm. Press
3
if
Cancel
76