Forwarding All Calls To Another Number; Using Do Not Disturb - Cisco 7921G User Manual

Forwarding All Calls to Another Number

You can use Call Forward All to redirect incoming calls from your phone to another number.
If you want to...
Set up call forwarding on
your primary line
Cancel call forwarding on
your primary line
Verify that call forwarding
is enabled on your primary
line
Set up or cancel call
forwarding for any line on
your phone.
When call forwarding is enabled for any line other than the primary line, your phone does not
Note
provide you with confirmation that calls are being forwarded. Instead, you must confirm your
settings in the User Options web pages.
Tips
• Enter the call forward target number exactly as you would dial it from your phone. For example,
enter an access code or the area code, if necessary.
• You can forward your calls to a traditional analog phone or to another IP phone, although your
system administrator might restrict the call forwarding feature to numbers within your company.
• Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not
enabled, the call will ring as usual.
• Your system administrator can change forwarding conditions for your phone lines.

Using Do Not Disturb

You can use Do Not Disturb (DND) to block incoming calls from ringing your phone. Your system
administrator enables DND for your phone.
When DND and Call Forward All are both enabled on your phone, calls are forwarded and the caller
does not hear a busy tone.
Your intercom lines still ring when DND is active.
38
Then...
1. Choose Options > CFwdAll.
2. Enter a target phone number.
Choose Options > CFwdAll.
Look for the call forward target number in the status line and the
icon next to the primary line.
1. Log in to your User Options web pages. See
User Options Web Pages, page
2. Choose Forward all calls...
3. Choose your primary line or any secondary line.
Accessing Your
81.
OL-10806-02