Cabletron Systems 9A426-01 User Manual page 44

LANVIEW LEDs
The status of the ATM Receive LED is listed in Table 4-6.
The status of the ATM Transmit LED is listed in Table 4-7.
The following section lists the conditions of the APIM status (STS) and
link (LNK) LANVIEW LED's.
Figure 4-2 show the location of LANVIEW LEDs on an APIM. For further
information about a particular APIM, refer to that specific APIM's
documentation.
4-4
Table 4-6. ATM Receive LEDs
LED Color
Yellow (Flashing)
Red
Off
Table 4-7. ATM Transmit LEDs
LED Color
Green (Flashing)
Red
Off
1 2 3 4 5 6 7 8
Figure 4-2. The LANVIEW LEDs of an APIM-22
State
Activity
Failure
No Activity
State
Activity
Failure
No Activity
STS
LNK