Related Manuals for Cabletron Systems 9F241-12
Summary of Contents for Cabletron Systems 9F241-12
- Page 1 SmartSwitch 9000 9F241-12 Local Management Appendix 9031587-01...
-
Page 3: Module Interfaces
Introduction This appendix contains local management information that is specific to the 9F241-12 MicroLAN module. Module Interfaces The 9F241-12 MicroLAN Module has four interfaces. Table 1 lists the indentifying number, name, and description of each interface. Interface Number FNB Resource Configuration Codes The 9F241-12 MicroLAN Module physically attaches to the FNB-1 and the FNB-2 on the SmartSwitch 9000 FNB backplane. - Page 4 9F241-12 Module Specific Information The FNB Resource Configuration Screen allows you to: • Select the rings (either primary or secondary) of each FNB to which the module will attach its MAC • Determine whether the module will insert into those rings or bypass those rings The terms INSERT and BYPASS refer to relays that are located on the module.
- Page 5 FNB, displays the current connection, and allows you to change the connection. Table 2 lists and describes the FDDI connections from which you can select. Table 2. 9F241-12 FNB Resource Configuration Codes Configuration FDDI Connections FNB 1 Pri. (MAC1) Byp., FNB 2 Pri.
- Page 6 9F241-12 Module Specific Information Table 2. 9F241-12 FNB Resource Configuration Codes (Continued) Configuration FDDI Connections FNB 1 Pri. (MAC1) Byp., FNB 2 Sec. (MAC2) Ins. FNB 1 Pri. (MAC1) Ins., FNB 2 Sec. (MAC2) Byp. FNB 1 Pri. (MAC1) Ins., FNB 2 Sec.
- Page 7 Table 2. 9F241-12 FNB Resource Configuration Codes (Continued) Configuration FDDI Connections FNB 1 Sec. (MAC1) Ins., FNB 2 Pri. (MAC2) Byp. FNB 1 Sec. (MAC1) Ins., FNB 2 Pri. (MAC2) Ins. FNB 1 Sec. (MAC1) Byp., FNB 2 Sec. (MAC2) Byp.
- Page 8 9F241-12 Module Specific Information Table 2. 9F241-12 FNB Resource Configuration Codes (Continued) Configuration FDDI Connections FNB 1 Sec. (MAC1) Ins., FNB 2 Sec. (MAC2) Byp. FNB 1 Sec. (MAC1) Ins., FNB 2 Sec. (MAC2) Ins. Description The module is attached to the FNB-1 secondary ring and the FNB-2 secondary ring.
-
Page 9: Module Specific Configuration Screen
MAC-1 or MAC-2. Module Name: 9F241-12 Slot Number: 11 FNB 1 Pri. (MAC1) Ins., FNB 2 Pri. (MAC2) Ins. PORT# SAVE Figure 1. 9F241-12 Module Specific Configuration Screen 9F241-12 Module Specific Information SmartSwitch 9000 LOCAL MANAGEMENT Module Specific Configuration Firmware Revision: 01.50.15 BOOTPROM Revision: 01.01.02... - Page 10 9F241-12 Module Specific Information Assigning an FNB Ring to a Module’s M-Port To assign an FNB ring to a module’s M-port: 1. Use the arrow keys to highlight the PATH field next to the desired port. 2. Press the SPACE BAR to toggle to the desired ring (either MAC-1 or MAC-2).
Need help?
Do you have a question about the 9F241-12 and is the answer not in the manual?
Questions and answers