Chapter 5 OPERATING PROCEDURE
12. Shifting a stitch pattern
Programs which have already been programmed can be moved up, down and to the left and right.
(However, such patterns will be reset if the power supply is turned off or the program number is changed.)
The feed position can be set to the any position desired.
C
A
D
1. Press the MENU switch y until the B.T.COUNTER indicator !0 illuminates.
2. Press and hold the TEST switch !5 and press R/W switch r. The test indicator !6 will light, and <
in the counter t.
3. Press the MENU switch y so the either the X-SCALE indicator u or Y-SCALE indicator i illuminates.
4. Turn the setting dial !2 to move the feed mechanism one pulse at a time.
If the setting dial is turned counterclockwise while the X-SCALE indicator is illuminated, the feed mechanism will
move to the right.
If the setting dial is turned clockwise while the X-SCALE indicator is illuminated, the feed mechanism will move to
the left.
If the setting dial is turned counterclockwise while the Y-SCALE indicator is illuminated, the feed mechanism will
move up.
If the setting dial is turned clockwise while the Y-SCALE indicator is illuminated, the feed mechanism will move
down.
* When moving the stitch pattern, the sewing start position can be moved to any desired point within the sewing area,
but if the pattern goes outside the sewing area, an error will not be able to sew the pattern. Give consideration to the
pattern as a whole when moving it.
5. When the TEST switch !5 is pressed, the TEST indicator !6 and display window t will both switch off and they will
return to the regular indication.
31
B
u
i
!0
r
y
BAS-364E, 366E, 370E, 375E
t
!2
!5
!6
> will appear