Brother BAS-364E Instruction Manual page 64

code
X motor or X servo amp trouble.
E. c3
Y motor or Y servo amp trouble.
E. c4
E. c6 +X over-travel error.
E. c7 -X over-travel error.
E. c8 +Y over-travel error.
E. c9 -Y over-travel error.
E. cA Feed error
E. d0 Air pressure has dropped.
E. E1 Control PCB detected communication error.
Cause
BAS-364E, 366E, 370E, 375E
Remedy
Check the error code for the servo amplifier. Turn off the
power and check if the connector for the motor or servo
amplifier is disconnected.
Check the error code for the servo amplifier. Turn off the
power and check if the connector for the motor or servo
amplifier is disconnected.
Turn off the power and check.
Turn off the power and check.
Turn off the power and check.
Turn off the power and check.
Turn off the power and check.
Turn off the power and check.
Turn off the power, wait a while and then turn it
back on.
Chapter 12 ERROR CODE
58