Adjusting The Air Pressure - Brother BAS-364E Instruction Manual

Chapter 3 INSTALLATION

14. Adjusting the air pressure

q
e
11
1. Air pressure should be 0.5 MPa.
w
2. If water stands in the bottle of the integrator q, turn
r
Note
BAS-364E, 366E, 370E, 375E
The air pressure can be adjusted by pulling up and
turning the control knob w on the integrator q.
After adjustment is complete, push the control knob w
downward to lock it.
the drain cock e in the direction indicated by an arrow
to drain the water.
Open the air cock r slowly.