Brother BAS-364E Instruction Manual page 59

Chapter 11 CHANGING SPECIAL FUNCTIONS AND USING THE MEMORY SWITCHES
I Memory switches [00] - [0F]
SW. No.
Feed plate moves in the order X ¡ Y when moving to the home position, and moves in the order
memo-00
Y ¡ X when moving to the sewing start position.
Feed plate moves in the order Y ¡ X when moving to the home position, and moves in the order
memo-01
X ¡ Y when moving to the sewing start position.
Feed plate moves in the order forward X ¡ Y when moving to the home position, and moves in
memo-02
the order forward X ¡Y when moving to the sewing start position.
Eject device operates.
memo-03
If DIP switch A-7 is also ON, eject is on standby so that sewing starts automatically.
memo-04 -
memo-05 -
memo-06 -
memo-07 -
memo-08 -
memo-09 -
memo-0A -
memo-0b
Set to "on" when using the 2-step tension device.
memo-0c -
memo-0d -
memo-0E -
memo-0F -
I Memory switches [10] - [1F]
SW. No.
memo-10 -
memo-11
Lower thread counter and production counter are updated each time thread is trimmed.
memo-12
Upper thread presser operates.
memo-13
Presser foot controller operates at 0.5 - mm intervals.
memo-14
Needle up errors are not detected.
memo-15 -
memo-16 -
memo-17
Bottom plunger operates.
memo-18
Jig recognition device operates.
memo-19 -
memo-1A -
memo-1b -
memo-1c
Lower thread counter is decremented at the sewing start.
memo-1d -
memo-1E -
memo-1F -
53
When "on"
When "on"
BAS-364E, 366E, 370E, 375E