Turning The Copier On And Off; To Turn The Copier On; When The Copier Is Turned On; Queuing A Job During Warm-Up - Kyocera KM-C2030 Operation Manual

1
1.5

Turning the Copier On and Off

To turn the copier on

➜
Set the power switch to "I".

When the copier is turned on

1
The indicator on the [Start] key lights up in orange.
A screen indicating that the machine is starting up appears.
2
After a few seconds, the message "Now warming-up. Ready to scan." appears
on the touch panel. When the indicator on the [Start] key lights up in green, a
job can be queued.

Queuing a job during warm-up

➜
An image can be scanned (a job can be queued) while the machine warms up
after it is turned on. If a job is queued, printing begins after the copier has fin-
ished warming up (after about 5 minutes at normal room temperature (68°F)).

Auto Panel Reset

G
The machine automatically resets all modes and functions to their default set-
tings if one minute has passed without the machine performing any operations.
G If the magnetic card is removed from the optional data controller, the machine
assumes that the user has changed and automatically resets all modes and
functions to their default settings.
G When the touch panel is reset, all settings that have not been stored, such as
the number of copies, return to their default settings (p. 1-20).
1-16
1.5 Turning the Copier On and Off