Turning The Machine On And Off; Turning On The Machine; When The Machine Is Turned On; Queuing A Job During Warm-Up - Kyocera KM-C2230 User Manual

2.3 Turning the Machine On and Off

2.3 Turning the Machine On and Off

Turning On the Machine

➜
Set the power switch to
[I].

When the Machine Is Turned On

1
The indicator on the [Start] key lights up in orange.
A screen indicating that the machine is starting up appears.
2
After a few seconds, the message "Now warming up. Ready to scan." appears
on the touch panel, and the indicator on the [Start] key lights up in green. A job
can now be queued.

Queuing a Job During Warm-Up

➜ A job can be queued while the machine warms up after it is turned on. After the
machine has finished warming up (after about 99 seconds at normal room
temperature (73.4 °F)), the scanned image is printed.

Panel Reset Timer

G If no operation is performed for the specified length of time, if the optional key
counter is removed, settings that have not been programmed in the machine,
such as the number of copies, are cleared and all modes and functions return
to their default settings.
G This is the panel reset timer operation.
G As the factory default, the panel reset timer operation is performed after 1
minute.
2
2-17