Using The Remote Printer Console Main Program - Brother MFC-P2000 - B/W Laser Printer Service Manual

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX and press the
Enter key to start the Remote Printer
Console main program.
The Main Screen will appear on your
computer screen as shown on the right.
The RPC gets the current settings information from your machine when it starts if bi-
directional communication is enabled between your computer and machine. Otherwise, the
RPC shows its default settings. If you want to change settings, move the cursor to the desired
item and select the desired setting by using the Enter and cursor keys. Then, press the
Enter key to make the selected setting valid. If you use a mouse, click the desired item to
change the setting.
Additionally, there are four sub-menus as shown in the table below. Select a sub-menu by
clicking the desired sub-menu with the mouse, by using the cursor key and the Enter key,
or by using the keys shown below to switch the screen to the sub menus.
Menu Press the keys Functions
Direct Access Alt + D
Machine Setup Alt + P
Console Config Alt + C
Guide Alt + G
Help F1
Direct_Access
[Alt+Character] Menu
You can directly control printer functions such as Print
Form, Self Print, Reset Printer, Sleep Control.
You can enter the setting mode to change further
machine settings, such as, margin settings, continue
mode, reprint function, font, and sleep mode.
You can change the environment settings for the RPC
program: color, Status Monitor configuration, etc.
You can get into the Guide mode.
You can get On-Line help about the current highlighted
item by pressing F1.
- 14 -
Remote Printer Console
Printer_Setup Console_Config
Current Status
Status Ready
Media Type Regular
Emulation Auto
Paper Size Letter
Orientation Portrait
Quality Normal
Copies 1
Memory Size 1048576 Bytes


[Enter]Setting
[ / ] Select
[Esc] Exit
[F1] Help
Guide