Brother MFC-P2000 - B/W Laser Printer Service Manual page 224

USER'S GUIDE
Error
COVER OPEN
PRINT OVERRUN
MEMORY FULL
This error can only occur
when using DOS.
Parallel Interface Line
Error
7-2
For errors shown below, the machine indicates an operator call by
blinking the Alarm lamp. If you use the machine with the supplied
Windows driver, the status monitor will appear to indicate the error on
your computer screen. The machine also prints some error messages on
paper.
Action
Close the top cover of the machine.


Press the panel switch to print the data remaining in the
machine.
If you use the supplied Windows
driver, try again after


turning on Error Recovery in the PRINT menu of your
application software, (Refer to the Help section in the
Windows
machine driver for the details.)


If this does not clear the error, reduce the complexity of
your document or reduce the print resolution.


Press the panel switch to print the data remaining in the
machine.


Reduce the print resolution or reduce the complexity of
your document.




Press the panel switch to resume printing.


Check that the connection between your computer and
machine is secure and correct, and check the interface
cable.