Paper Handling - Brother MFC-P2000 - B/W Laser Printer Service Manual

USER'S GUIDE

Paper Handling

Question
The machine does not load
paper.
How can I load envelopes?
What paper can I use?
How can I clear paper jams?
7-12
Recommendation


Check to see if the "PAPER EMPTY" message
appears on your computer screen or the Alarm
and Paper lamps are blinking on the machine
control panel. If so, the multi-purpose sheet feeder
may be out of paper or not properly installed. If it
is empty, load a new stack of paper into the
feeder.


If there is paper in the multi-purpose sheet feeder,
make sure it is straight. If the paper is curled, you
should straighten it before printing. Sometimes it
is helpful to remove the paper, turn the stack over
and put it back into the paper tray.


Reduce the amount of paper in the multi-purpose
sheet feeder, then try again.
You can load envelopes from either the multi-purpose
sheet feeder or the manual feed slot. Your application
software must be set up correctly to print on the
envelope size you are using. This is usually done in
the page setup or document setup menu of your
software. Refer to your application manual.
You can use plain paper, envelopes, transparencies,
labels, and organizer paper. For information on
loading paper, see "Paper Handling" in Chapter
See "PAPER JAMS" in this chapter.
2.