Brother MFC-P2000 - B/W Laser Printer Service Manual page 161

For errors shown below, the machine indicates an operator call by blinking the Alarm lamp.
If you use the machine with the supplied Windows driver, the status monitor will appear to
indicate the error on your computer screen. The machine also prints some error messages on
paper.
Error
Cover Open
Print Overrun
Memory Full
This error can occur only
when using DOS or
Macintosh.
Parallel Interface Line
Error
Action
Close the top cover of the machine.

 Press the panel switch to print the data remaining in the
machine.

 If you use the supplied Windows
turning on Error Recovery in the PRINT menu of your
application software, (Refer to Help section in the Windows
printer driver for the details.)

 If this does not clear the error, reduce the complexity of your
document or reduce the print resolution.

 Press the panel switch to print the data remaining in the
machine.

 Reduce the print resolution or reduce the complexity of your
document.

 Press the panel switch to resume printing.

 Check that the connection between your computer and machine
is secure and correct, and check the interface cable.
- 32 -


driver, try again after