Lamps And Switch For Printing Function - Brother MFC-P2000 - B/W Laser Printer Service Manual

LAMPS AND SWITCH FOR THE PRINTING FUNCTION
This section refers to the following lamps and switch on the machine control panel.
Note
When the power switch is off or the machine is in sleep mode, all lamps including the
Ready lamp are off.
Ready (Paper) Lamp
The Ready lamp indicates the current status of the machine.
Lamp Machine status
The power switch is off or the machine is in sleep mode. If the
Off
machine is in sleep mode, it will wake up automatically when it
receives data or you press the control panel switch.
The machine is warming up. (Blinking at 1 second intervals)
Blinking
The machine is cooling down and has stopped printing until the
Blinking
machines internal temperature lowers. (Blinking at 2 seconds intervals)
The machine is ready to print.
On
This lamp also works as the Paper lamp with the Alarm lamp. They blink
simultaneously to indicate a paper error. See "Operator Calls" section of this manual.
Data (Toner) Lamp
The Data lamp indicates the current status of the print data process.
Lamp Machine status
The machine has no print data.
Off
The machine is receiving data from the computer or the machine is
Blinking
processing data in memory.
Print data remains in the machine memory. If the Data lamp is on for a
On
long period of time and nothing has printed, you need to press the
switch to print the remaining data.
This lamp also works as the Toner lamp with the Alarm lamp. They blink
simultaneously to indicate a toner error. See "REPLACING THE TONER
CARTRIDGE" in
manual.
Chapter 6 of the On-line manual and "Operator Calls" section in this
- 16 -