Brother MFC-P2000 - B/W Laser Printer Service Manual page 150

Error
If an error ocurrs, the machine shows "E" on the display.
To clear the error, press the Stop button.
Errors occur when the following happens;
*When the document causes a paper jam in the document feeder when the machine is
feeding the document.
*When the machine is busy. (When the machine is used as a scanner or printer.)
*When there is no paper in the sheet feeder.
*When memory full happens and the machine prints out an error message.
When there is no document in the Document Feeder when you try to copying, the
machine shows the number of copies and the letter "P" alternately on the display.
When you see this, insert the document in the Document Feeder.
Note
When memory full error is likely to happen, the machine change the vertical reslotion from
600 dpi to 300 dpi and copy a document automatically. In this case, the machine displays "F"
on the display.
- 21 -