CHAPTER 7
TROUBLESHOOTING
ALARM INDICATIONS AT A GLANCE
Operator Calls for the Printing Function
If a recoverable error occurs, the machine indicates an 'operator call' by
blinking the Alarm lamp and any of the following lamps.
Find the error and take the proper action to correct it. The machine
automatically recovers from most errors, but you may need to reset the
machine with the panel switch as described below.
Blinking Lamp
Paper
Alarm
Toner
Alarm
(every 5 seconds)
Toner
Alarm
(Fast blinking)
Error
Action
Paper jam
Clear the paper jam referring to the next section
"PAPER JAMS"
the machine does not automatically resume
printing.
Paper empty
Load paper in the machine referring to
and press the panel switch.
Reinstall the paper and press the panel switch.
Misfeed
Toner low
Indicates that the machine has approximately 100
pages of printing left before the toner cartridge is
empty. Prepare a new toner cartridge.
Toner Empty
Replace the toner cartridge with a new one
referring to
CHAPTER 7 TROUBLESHOOTING
and press the panel switch if
Chapter 6.
Chapter 2
7-1