Using The Remote Printer Console Main Program - Brother HL-1070 Service Manual

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX and press the Enter
key to start the Remote Printer Console
main program.
The Main Screen will appear on your
computer screen as shown on the right.
The RPC gets the current settings information from your printer when it starts if bi-directional
communication is enabled between your computer and printer. Otherwise, RPC shows its
default settings. If you want to change settings, move the cursor to the desired item and select
the desired setting by using the Enter and Cursor keys. Then, press the Enter key to make the
selected setting valid. If you use a mouse, click the desired item to change the setting.
Additionally, there are four sub-menus as shown in the table below. Select a sub-menu by
clicking the desired sub-menu with the mouse, by using the cursor key and the Enter key, or
by using the keys shown below to switch the screen to the sub menus.
Menu Press the keys Functions
Direct Access Alt + D
Printer Setup Alt + P
Console Config Alt + C
Guide Alt + G
Help F1
Direct_Access
[Alt+Character] Menu
You can directly control printer functions such as Print
Form, Self Print, Reset Printer, Sleep Control.
You can enter the setting mode to change further printer
settings, such as, margin settings, continue mode,
reprint function, font, and sleep mode.
You can change the environment settings for the RPC
program: color, Status Monitor configuration, etc.
You can get into the Guide mode.
You can get on-line help about the current highlighted
item by pressing F1.
- 19 -
Remote Printer Console
Printer_Setup Console_Config
Current Status
Status Ready
Media Type Regular
Emulation Auto
Paper Size Letter
Orientation Portrait
Quality Normal
Copies 1
Memory Size 1048576 Bytes


[Enter]Setting
[ / ] Select
[Esc] Exit
[F1] Help
Guide