Loading Paper Into The Feeder - Brother MFC-P2000 - B/W Laser Printer Service Manual

Loading Paper into the Feeder

To load paper into the feeder, follow these steps.
1. Open the multi-purpose sheet feeder by gently pulling the lid forward
towards you. (
2. Load paper into the multi-purpose sheet feeder with the printing
surface face down. ( )
!
Caution

The feeder can hold up to 200 sheets of plain paper (75 g/m
If you load too many sheets, paper jams could occur.

Make sure that the paper is stacked below the

If there is still some paper in the feeder, you must first remove it, put
it together with the new paper and then insert the stack in the feeder.
Note
If you load envelopes in the feeder, make sure they are inserted in the
direction shown above.
).
Fig. 2-5 Opening the Feeder and
Loading Paper or Envelopes in the Feeder
CHAPTER 2 PAPER HANDLING
2
, 20 lb.).
mark.
2-7