Sec-1124; Sec-1126; Sec-1130; Sec-1135 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

SEC-1124

Message
<timestamp>, [SEC-1124], <sequence-number>,, INFO, <system-name>, Secure Mode is
off.
Probable Cause Indicates that a secure mode disable is attempted in a non-secure fabric.
Recommended No action is required.
Action
Severity INFO

SEC-1126

Message
<timestamp>, [SEC-1126], <sequence-number>,, INFO, <system-name>, Secure mode has
been disabled.
Probable Cause Indicates that a secure mode disable operation completed successfully.
Recommended Verify that the security event was planned. If the security event was planned, no action is required.
Action If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO

SEC-1130

Message
<timestamp>, [SEC-1130], <sequence-number>,, INFO, <system-name>, The Primary FCS
has failed over to a new switch.
Probable Cause Indicates that an FCS failover operation was completed successfully.
Recommended Verify that the security event was planned. If the security event was planned, no action is required.
Action If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO

SEC-1135

Message
<timestamp>, [SEC-1135], <sequence-number>,, INFO, <system-name>, Secure fabric
version stamp has been reset.
Probable Cause Indicates that the version stamp of the secure fabric is reset.
Recommended Verify that the security event was planned. If the security event was planned, no action is required.
Action If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
Fabric OS Message Reference
53-1000600-02
66
SEC-1124
393