Rtwr-1001; Rtwr-1002; Rtwr System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

RTWR System Messages

RTWR-1001

Message
<timestamp>, [RTWR-1001], <sequence-number>,, ERROR, <system-name>, RTWR
<routine: error message> 0x<detail 1>, 0x<detail 2>, 0x<detail 3>, 0x<detail 4>,
0x<detail 5>
Probable Cause Indicates that an error occurred in the RTWR. The message provides the name of the routine
having the error, and more specific error information. The values in details 1 through 5 might
provide more information.
Recommended No action is required.
Action
Severity ERROR

RTWR-1002

Message
<timestamp>, [RTWR-1002], <sequence-number>,, WARNING, <system-name>, RTWR <error
message> 0x<detail1>, 0x<detail2>, 0x<detail3>, 0x<detail4>, 0x<detail5>
Probable Cause Indicates that the RTWR has exhausted the maximum number of retries sending data to the
specified domain. Possible detail values include:
•
•
•
•
•
•
Recommended Run the fabricShow command to see if the specified domain ID is online.
Action
Enable the switch with the specified domain ID.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
Fabric OS Message Reference
53-1000600-02
RTWRTransmit: Max retries exhausted
detail1: Port
detail2: Domain
detail3: Retry Count
detail4: Status
detail5: Process ID
Chapter
63
359