Ag-1011; Ag-1012; Ag-1013; Ag-1014 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

2

AG-1011

AG-1011
Message
<timestamp>, [AG-1011], <sequence-number>,, WARNING, <system-name>, Sending FDISC
failed on N_Port <port>.
Probable Cause Indicates failure of sending the discover F_Port service parameter request from the Access
Gateway to the fabric switch.
Recommended Please check the configuration of the fabric switch connected to the Access Gateway.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING

AG-1012

Message
<timestamp>, [AG-1012], <sequence-number>,, WARNING, <system-name>, Sending
logout(LOGO)request failed on N_Port <port>.
Probable Cause Failure sending N_Port logout request from the Access Gateway to the fabric switch.
Recommended Please check the configuration of the fabric switch connected to the Access Gateway.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING

AG-1013

Message
<timestamp>, [AG-1013], <sequence-number>,, INFO, <system-name>, F_Ports mapped
to N_Port <port> failed over to other N_Port(s).
Probable Cause Indicates that the specified N_Port is failing over to other N_Port(s) connected to the same fabric.
Recommended Run the ag --mapshow command to display updated F_Port to N_Port mapping.
Action
Severity INFO

AG-1014

Message
<timestamp>, [AG-1014], <sequence-number>,, INFO, <system-name>, Failing back
F_Ports mapped to N_Port <port>.
Probable Cause Indicates that the specified N_Port is failing back F_Ports mapped to the specified N_Port.
Recommended Run the ag --mapshow command to display updated F_Port to N_Port mapping.
Action
26 Fabric OS Message Reference
53-1000600-02