Bksw-1003; Bksw System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

BKSW System Messages

BKSW-1003

Message
<timestamp>, [BKSW-1003], <sequence-number>,, WARNING, <system-name>, kSWD:
<warning message>.
Probable Cause Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. This message is used to
convey information that might be of interest to the customer regarding the state of the system.
Refer to the string at the end of the error message for specific information. The switch will reboot
(on single-CP switches) or failover (on dual-CP switches).
The warning message might be any one of the following:
•
•
Recommended Run the supportSave command to determine if any core files were created. If a core file is found,
Action run supportFtp to send all core files to a secure server location.
Copy the error message and any core file information, and contact your switch service provider.
Severity WARNING
Fabric OS Message Reference
53-1000600-02
<Detected unexpected termination of: <daemon name>>
Probable Cause: One of the critical daemons ended unexpectedly.
<<daemon name> failed to refresh SWD*** Sending SIGABRT to PID <process id number>>
Probable Cause: One of the critical daemons is found to be nonresponsive; sending signal
abort.
Chapter
4
45