Lacp Admin-Key; Lacp System-Priority - TP-Link TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
Example
Enable LACP protocol on the port 1:
TP-LINK(config)# interface Ethernet 1
TP-LINK(config-if)# lacp
lacp admin-key
Description
The lacp admin-key command is used to configure the admin key. To restore to
the default value, please use no lacp admin-key command.
Syntax
lacp admin-key value
no lacp admin-key
Parameter
value —— admin key, ranging from 0 to 65535. By default, the value is 0.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Configure the admin key of port 1 as 1024:
TP-LINK(config)# interface Ethernet 1
TP-LINK(config-if)# lacp admin-key 1024
lacp system-priority
Description
The lacp system-priority command is used to set the system priority for a port.
To restore to the default priority, please use no lacp system-priority
command.
Syntax
lacp system-priority value
no lacp system-priority
48
Advertisement
Table of Contents
