Igmp Vlan-Config - TP-Link TL-SL5428E Cli Reference Manual

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
seconds. By default, it is 260.
leave-time —— Leave Time, which is the interval between the switch reveiving
a leave message from a host and the switch removing the host from the
multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1.
router-port —— Static Router Port, which is mainly used in the network with
stable topology. It ranges from 1 to 28.
Command Mode
Global Configuration Mode
Example
Enable IGMP Snooping for VLAN 1, and configure Router Port Time as 200
seconds, Member Port Time as 100 seconds, Leave time as 10 seconds and
Static Router Port as port 1:
TP-LINK(config)# igmp vlan-config-add 1 rtime 200 mtime 100 ltime 10
rport 1

igmp vlan-config

Description
The igmp vlan-config command is used to modify IGMP Snooping parameters
for individual VLANs. To return to the primary configuration of the corresponding
VLAN, please use no igmp vlan-config command.
Syntax
igmp vlan-config {vlan-id} [rtime router-time] [mtime member-time] [ltime
leave-time] [rport router-port]
no igmp vlan-config {vlan-id}
Parameter
vlan-id —— The ID of the VLAN desired to modify configuration, ranging from
1 to 4094.
router-time —— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time —— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
162