Dos-Prevent Detect; Dos-Prevent Reset-Statistic - TP-Link TL-SL5428E Cli Reference Manual

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
syn-flood —— SYN/SYN-ACK flooding attack.
win-nuke —— winNuke Attack attack.
Command Mode
Global Configuration Mode
Example
Enable four DoS Defend Types named Land attack, Xma Scan attack, Smurf
attack and Ping flooding attack:
TP-LINK(config)# dos-prevent land xma-scan smurf ping-flood

dos-prevent detect

Description
The dos-prevent detect command is used to detect the DoS attack. DoS
Detect functions to detect the details of the DoS attack packets, based on which
you can quickly locate the attacker in the local network.
Syntax
dos-prevent detect detect-time
Parameter
detect-time ——Specify the detect time for each DoS attack type except the
flooding attack type ranging from 1 to 5 in second.
Command Mode
Global Configuration Mode
Example
Detect the DoS attack and specify the detect time for each DoS attack type
except the flooding attack type as 5 seconds:
TP-LINK(config)# dos-prevent detect 5

dos-prevent reset-statistic

Description
The dos-prevent reset-statistic command is used to clear the information
statistic of the detected DoS attack.
78