TL-SL5428E
24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
TP-LINK(config)# acl bind to-port policy1 1
acl bind to-vlan
Description
The acl bind to-vlan command is used to bind a policy to a VLAN. To cancel
the bind relation, please use no policy to-vlan command.
Syntax
acl bind to-vlan {policy-name} {vlan-id}
no policy to-vlan {policy-name} {vlan-id}
Parameter
policy-name —— The name of the policy desired to bind.
vlan-id —— The ID of the VLAN desired to bind, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Bind policy1 to VLAN 2:
TP-LINK(config)# acl bind to-vlan policy1 2
show acl time-segment
Description
The show acl time-segment command is used to display the configuration of
Time-Range.
Syntax
show acl time-segment
Command Mode
Any Configuration Mode
Example
Display the configuration of Time-Range:
TP-LINK> show acl time-segment
146