Show Bridge Dynamic-Bind; Show Bridge Address - TP-Link TL-SL5428E Cli Reference Manual

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Add a filtering address entry whose VLAN ID is 1 and MAC address is
00:1e:4b:04:01:5d:
TP-LINK(config)# bridge address filtering 00:1e:4b:04:01:5d 1

show bridge dynamic-bind

Description
The show bridge dynamic-bind command is used to configure the Port
Security for each port, such as configure the Max number of MAC addressed
that can be learned on the port and the Learn Mode.
Syntax
show bridge dynamic-bind [port-num]
Parameter
port-num —— The port number of the switch. It ranges from 1 to 28. By default,
the Port Security configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the Port Security configuration of port2:
TP-LINK(config)# show bridge dynamic-bind 2

show bridge address

Description
The show bridge address command is used to display the information of all
Address entries.
Syntax
show bridge address { dynamic | static | filter | all }
Parameter
dynamic | static | filter | all —— the type of your desired entry
Command Mode
110